Small vintage tribal domed stud buttons for DIY tribal costuming.
Size: Approximataely 3/8 inch across
Number of Buttons: 80
Cord Lengths: 20 inches and 15 inches
Cord Color: Metallic Cord
Materials: Mixed base metals
Metal color: Mostly Silvery
Metal Finish: Unpolished but somewhat shiny
In fair to poor condition - useable, but dinged and bent.
80 small vintage tribal dome stud style buttons on two strings. Button loop or shank on the back for attaching. Metal color is mostly silvery. Cords are 20 and 15 inches respectively. Some buttons are dented, dinged, misshapen or have other flaws. These buttons have been taken from old tribal clothing or accessories, bags or animal trappings. While you might be able to keep these buttons on the original strings and sew them directly to your costuming project, it would probaby be better to take them off the original strings and restring them or use individually.
Please note: These are USED buttons that have previously adorned tribal clothing, accessories, household goods, animal trappings or other items. They are hand-assembled. These buttons may have small flaws such as shanks being off center, small dents, or the edges may be bent or curled.
Tips for using DIY tribal buttons:
Buttons seem to be the one costuming item that puzzles people more than any other! Frequent questions are "How do you get these attached?" and "Do you need a special or curved needle?" And sometimes we even hear "I just can't get them sewn on!" The trick is to do as the tribal people themselves do! The easiest way is to braid some yarn (available in ANY color to match costuming) into a long piece. Then take a piece of cellophane tape and make an aglet (think shoelace end) on one end of the braid. Using the taped end, thread the braided yarn through the shank on the back of the button. Repeat with as many buttons as you need, then sew the braided yarn down in any row or pattern that you like! Another tip that we sometimes use for adding a few individually spaced buttons is to drill a small hole on each side of it and simply sew through the holes. Use a 1/16 inch drill bit and be very careful. Sometimes buttons are thinner metal and holes can be punched with an awl. Of course, if your buttons are already strung on a cord or rolled fabric, you can simply sew the cord down to your costuming project and be done!