Vintage String of 25 XL Tribal Dome Stud Buttons - Tribal DIY Costuming Buttons - Tribal Belly Dance Dome Stud Buttons

Item No: DMB1042
Country of Origin: Pakistan
Materials: Mixed Metals
Condition: Great
Qty in Stock: 1

25 extra large vintage tribal domed stud buttons for DIY tribal costuming.  

Size:  Approximately 5/8 inch across
Number of Buttons:  25
Cord Length:  15.5 inches
Materials: Mixed base metals 
All matching
Metal color:  Slightly brassy
Finish:  Unpolished

String of 25 super big old tribal dome stud style buttons.  Button shank on the back of each.  Made by tribal craftsmen.  These buttons have been taken from old tribal clothing or accessories, bags or animal trappings.  Metal color is slightly brassy and they are unpolished.   They are strung onto an old piece of rolled and sewn red fabric with a bit of old metallic decorative braid.  Cord is 15.5 inches long.  These are old, used buttons, but are in great condition and are contenders for the largest stud style buttons I've seen.  You can sew this original fabric piece to your project or restring the buttons onto new cord.  

Please note:  These are USED buttons that have previously adorned tribal clothing, accessories, household goods, animal trappings or other items.  They are hand-assembled.  These buttons may have small flaws such as shanks being off center, small dents, or the edges may be bent or curled. 

Tips for using DIY tribal buttons:
Buttons seem to be the one costuming item that puzzles people more than any other!  Frequent questions are "How do you get these attached?" and "Do you need a special or curved needle?"  And sometimes we even hear "I just can't get them sewn on!"  The trick is to do as the tribal people themselves do!  The easiest way is to braid some yarn (available in ANY color to match costuming) into a long piece.  Then take a piece of cellophane tape and make an aglet (think shoelace end) on one end of the braid.  Using the taped end, thread the braided yarn through the shank on the back of the button.  Repeat with as many buttons as you need, then sew the braided yarn down in any row or pattern that you like!  Another tip that we sometimes use for adding a few individually spaced buttons is to drill a small hole on each side of it and simply sew through the holes.  Use a 1/16 inch drill bit and be very careful.  Sometimes buttons are thinner metal and holes can be punched with an awl.  Of course, if your buttons are already strung on a cord or rolled fabric, you can simply sew the cord down to your costuming project and be done!



Shopping Cart

Shopping Cart Empty